Lead-selective poly(vinyl chloride) membrane electrodes based on acyclic dibenzopolyether diamides

Lipophilic acyclic dibenzopolyether diamides, 12 kinds, have been designed to prepare solvent polymeric membrane ion-selective electrodes (ISEs) for Pb(2+). The ionophores include 1,5-bis[2-(N,N-dialkylcarbamoylmethoxy)phenoxy]-3-oxapentanes1-4, 1,5-bis[2-(N,N-dialkylcarbamoylpentadecyloxy)phenoxy]-3-oxapentanes 5-8, and 1,2-bis[2-(2'-N,N-dialkylcarbamoylpentadecyloxy)phenoxy]ethanes 9-12. Linear response concentration range of the ISE based on 9 is 3 x 10(-2) - 1 x 10(-6) M of Pb(2+) (average slope = 28.5 mV decade(-1)). Potentiometric selectivities of the ISEs based on 1-12 for Pb(2+) over other heavy metal cations, alkali metal cations, and alkaline earth metal cations have been assessed. These ISEs exhibit remarkably high selectivities for Pb(2+) relative to heavy metal cations, such as Cu(2+), Fe(2+), and Ni(2+), the selectivity coefficients (K(Pot)(Pb,Cu)) being 5 x 10(-5) - 6 x 10(-5) for 1-4 and ca. 6 x 10(-4) for 9. For the Pb(2+) selectivities over alkali metal cations, such as Na(+) and K(+), 9 which has an ethylene glycol spacer and a N,N-diethyl group is superior to other dibenzopolyether diamide ionophores 1-8 and 10-12.     

Towards the selective formation of specific isomers of fullerenes: T - and p-dependence in the yield of various isomers of fullerenes C60–C84

Systematic fractional change in the yield of various isomers of fullerenes was revealed to strongly depend on temperature of a buffer gas. A new kinetic consideration is proposed for understanding the observed temperature- and pressure-dependence of yield of fullerenes. The model consists of three competitive reactions in consideration of plausible behaviors of a precursor, (1) decomposition into smaller fragments, (2) isomerization leading to formation of a stable fullerene cage, and (3) growth into a larger carbon cluster. Arrhenius activation energy of formation of stable fullerenes was determined to be 0.8 eV for both C₆₀ and C₇₀, while a higher energy of 2.0?3.3 eV for seven different isomers of higher fullerenes ranging from C₇₆ to C₈₄. Correlation in the activation energy is noted for a series of higher fullerenes with different sizes, suggesting the existence of a specific precursor in their formation processes.     

Preparation of zein microspheres conjugated with antitumor drugs available for selective cancer chemotherapy and development of a simple colorimetric determination of drugs in microspheres

Zein microspheres conjugated with antitumor drugs (mitomycinc (MMC), daunomycin hydrochloride (DM), peplomycin sulfate (PEP] were prepared by using a dimethyl sulfoxide (DMSO)-H2O system. MMC with low solubility in H2O was easily entrapped by the standard procedure, whereas some modifications were required for moderately and highly soluble drugs such as DM and PEP. Colorimetric determination of the drugs in microspheres was easily achieved by use of the phenol-sulfuric acid method for drugs with sugar moieties in their molecules, such as DM and PEP, while a simple treatment of the microspheres with concentrated sulfuric acid was applied in the case of drugs having a chromophore in their molecules, such as DM and MMC.     

Flow-injection determination of 9,10-phenanthrenequinone with catalytic photometric detection

A catalytic photometric method with a flow-injection system is described for the determination of 9,10-phenanthrenequinone. It is based on the catalytic effect of 9,10-phenanthrenequinone on the redox reaction of 1,2-dinitrobenzene with formaldehyde under alkaline conditions. 9,10-Phenanthrenequinone at the 5.0 x 10(-8)-5.0 x 10(-6)M level can be determined at a rate of 20 samples/hr. The detection limit is 1.0 x 10(-8)M (40 pg in a 10-microl injection).     

Electrothermal atomic-absorption spectrometry of arsenic and its application to environmental samples

Electrothermal atomization of arsenic with a metal micro-tube atomizer has been studied. Thiourea and thionalide were found to give effective atomization of arsenic. A method involving extraction of the thionalide complex for determining traces of arsenic in water and soil is described.     

Analytical high-performance affinity chromatography of ovalbumin-derived glycopeptides on columns of concanavalin A-and wheat germ agglutinin-immobilized gels

Concanavalin A (Con A) or wheat germ agglutinin (WGA) was immobilized on a silica-based support, and the chromatographic behaviours of a series of dansylated ovalbumin-derived glycopeptides on small columns of the resultant gels were compared. These columns had high contents of lectins, and allowed differentiation of these glycopeptides. This method was rapid and reproducible, and enabled sensitive detection of these fluorescent glycopeptides. The structural requirement of these glycopeptides to manifest affinity to the immobilized lectins is also discussed, based on binding constants obtained from their retention times.     

Furan derivatives. Part 8 On substituent effects in the synthesis of 4,5-dihydro-3H-naphtho[1,8-bc]furans

4,5-Dihydro-3H-naphtho[1,8-bc]furans 4 and 6 which have various substituents (R¹ and R²) have been synthesized from 8-oxo-5,6,7,8-tetrahydro-1-naphthyloxyacetic acids 1 and 3 or their ethyl esters 2 . The reaction of acids 1 and 3 with sodium acetate in acetic anhydride gave a mixture of furans 4 and 6 and lactones 5 and 7 . The ratios of the products were varied according to the types of substituents (R¹ and R²) in acids 1 and 3 . As the substituent R¹ (R² = hydrogen) in acids 1 was changed from hydrogen to a methyl, ethyl or isopropyl group, production of furans 4 became more difficult. However, when a phenyl group was used as the substituent, furan 4 was obtained in good yield. Similarly, as the substituent R² (R¹ = hydrogen) in acids 1 was changed from hydrogen to a methyl, ethyl or isopropyl group, furan formation was more difficult. In contrast, acids 3 which had electron-withdrawing substituents such as chlorine, bromine or a nitro group at the 4-position afforded furans 6 in good yield. 4,5-Dihydro-3H-naphtho[1,8-bc]furans 4 and 4,5-dihydro-3H-naphtho[1,8-bc]furan-2-carbocylic acids 8 were synthesized from the reaction of esters 2 and potassium hydroxide in dioxane. When the substituents R¹ or R² in esters 2 were varied from hydrogen to a methyl, ethyl or isopropyl group the total yields of furans 4 and furancarboxylic acids 8 were reduced.     

Regiospecific α-dialkoxymethylation of preformed enolates

Reaction of a preformed lithium enolate and trimethyl orthoformate with added boron trifluoride leads to the corresponding α-dimethoxymethyl ketone.     

Evaluation of thallium-201 myocardial emission computed tomography based on a comparison with postmortem findings

The correlative study of myocardial perfusion assessed by 201Tl myocardial ECT with the pathological finding of the heart was performed in 10 autopsied cases with mean age of 77 years old (range: 60-90 y). In 6 cases with myocardial infarction (MI) 7 perfusion defects were observed, that was, 3 in anteroseptal wall, 1 in anterolateral wall and 3 in posterior wall on the images of SPECT. Seven MIs were also found in postmortem examination. Six MIs were observed at autopsy corresponding to perfusion defect on SPECT images. In one myocardial perfusion defect at inferoposterior portion on SPECT, a non-transmural MI was found at anteroseptum. In one case with valvular disease a false positive result was obtained at posterior wall where neither myocardial necrosis nor fibrosis was observed at autopsy. This case had aortic stenosis due to bicuspid aortic valve by autopsy. The ventricle was divided into 16 segments in each of 4 short axial images to evaluate extent of MI. SPECT for extent of MI showed sensitivity of 81.9%, specificity of 96.0% and diagnostic accuracy of 92.5%. False negative segment was apt to be observed at the surrounding of non-transmural MI or basal half of left ventricle (LV) with transmural MI, while false positive segment was at posterior portion of basal half of LV. It was concluded that myocardial ECT was useful for evaluation of the site and extent of MI.     

The study of electron beam flue gas treatment for coal-fired thermal plant in Japan

The fundamental research work with simulated coal-fired flue gas was performed in JAERI to get basic data for electron beam treatment of flue gas from thermal power plants in Japan. The standard condition of the experiments was set to be the same as that of next large scale pilot test in Nagoya. The concentrations of NO_x and SO_x were 225 ppm and 800 ppm, respectively. The temperature of the system was 65°C. The effect of multiple irradiation was observed for NO_x removal. The target SO_x and NO_x removals (94% and 80%, respectively) with low NH₃ leakage (less than 10 ppm) were achieved at 9 kGy irradiation with 0.9 NH₃ stoichiometry during 7 hours continuous operation. The facility for the pilot plant (12,000 Nm³/hr) has just built at the site of Shin-Nagoya power plant of Chubu Electric Power Company and will be started in full operation in November 1992.